Regardless of the type of your car, it holds always a special place in your heart. This is the reason that you are always extra conscious regarding the maintenance of the car. Your car needs special attention. Even the car’s headlights deserve special care so that you can get the best look for your car. Gone are these days when people can only purchase the glass headlights.
Now the acrylic plastic headlights lenses have gained lots of popularity. These are quite susceptible to damage from dust, pit, scratches, and fractures. Hence, it is essential to keep them scratch free as much possible. It will save lots of your money of yours and give you a long lasting solution to keep your headlights in good condition.
Reason to use the dust covers:
- Now it is really possible to keep the headlights damage free and dust free with the help of the Headlight Dust Covers. It can save the headlights of your car from dust and stone chips that can cause damage when you are driving on the road. There are the dust covers available in the market, and the consumers can avail it from the market. They are easily affordable and can help you to keep your expensive car in good condition.
- To replace the stock cap, you can use the dust cover. Just drill a hole in this cover to get the wire. It will come from the headlight bulb, at the outer part of the headlight assembly. Now you need to seal it for dust and water. When you install LED headlights, these dust covers play a major role.
- The bulb of the LED headlights comes up with a larger heat sink. When installing the bulb, heat sink helps the dusk cap to be installed again. These dust covers come with the typical cylinder shape and enough place for that heat sink. As the headlight bulbs are working, heat sink generates the heat and without them the bulbs also not able to dissipate the heat. While you use the LED bulbs without any heat sink, it may reduce the illumination of the light, and the bulbs lose their life eventually. Heat sinks are important to increase the lifespan of the bulbs, and the cover helps to use the heat sink properly.
Dust covers also prevent the dust to enter the housing of the headlight. With the covers, the fan can run quite smoothly, and it gets more life span.
Some of the headlights come with a flat edge and without any holding point for the covers. Or if the dust covers it too big to cover the headlight, you need to drill a different hole on its stock cap to set the cover. After setting up the cover, use a sealant to seal the hole completely.
You can keep the headlights of your car in a tip-top condition for many years just by adding the dust covers. They are usually made of high-quality rubber and come with good spacing for the LED light and the fan both.