How To Install Jeep Wrangler Led Headlights: JK JKU TJ
Owing a JEEP Wrangler is like being the king of the road. Your vehicles sit taller than others, and you get a feeling that you are literally flying above the common lot. The Jeep Wrangler is a vehicle for all roads and all the weather conditions.
You can ride the vehicle on highways and other smaller roads comfortably. You can also do a lot of off-roading with the vehicle. But you must ensure that you equip the vehicle with the best accessories if you want to make full use of the vehicle.
Getting LED Headlights For Your JEEP Wrangler
This is one of the best accessories that you can buy for your vehicle. It will make your driving even more of a pleasure.
Sometimes you may find your original headlights failing to meet your expectations, especially when you are off-roading. It is essential to get a pair of good LED headlights that will make your ride safer for yourself and others.
Luckily there are many choices when it comes to buying LED headlights for your JEEP. There are definite advantages in changing to LED headlights. The headlights offer better lighting and help you drive more comfortably.
LED headlights don’t blind the driver on the opposite side. They are actually more fuel-efficient as they require lesser power. LED headlights last much longer than your original headlights. With so many advantages there is no doubt you must change your headlights.
LED Vs. Halogen Lights
Before we see how to install JEEP Wrangler LED headlights, let us see the other available options to your stock headlights. Halogen is another common option that many people recommend. Let us see how this two compare.
The first advantage with LED lights is that they consume much lesser power compared to the Halogen option. Another big advantage is that the LED lights last much longer than Halogen lights. But when it comes to cost the LED lights cost you more than Halogen lamps.
Installing Your JEEP Wrangler LED Headlights
Before you see how to install JEEP Wrangler LED headlights, you must have done your research and got yourself the right LED headlights. This is very important for getting what you want. See the various options available and buy the one that most suits your needs.
Once you have purchased from a local shop or online, please inspect the contents of the box and ensure that everything is present there as per the company’s list.
The first step to installing your LED headlights is to remove the rubber clips and opening your hood. You must remove the front grill if you want access to your headlights. It is easy to remove the screws with normal tools.
You must be careful not to damage the grill when removing it. You can put your hands underneath to push grill upwards and remove it safely.
Remove the four screws that hold the headlight. You can now remove the metal ring around the light that holds it. Once you have removed the ring, you can remove the headlights. Carefully unplug the adapter and remove your old headlights.
You can fit your new LED headlights by following the same steps in the reverse order. You must be sure that all the connections are secure. If your model of the JEEP uses the H4 socket, you can use the converter to connect the H13 socket.
You must make sure that you have connected the LED anti-flicker driver module. This is necessary if you don’t want to burn out your LED lights.
Testing Your Installation
Once you have made all the connections, you must switch on the lights and see if they work properly. If your lights don’t work at all, please check all the pins on both the adapters of the LED light and the module box.
Ensure all the pins are pushed in securely. If the lights still refuse to work, you may need to disconnect the adapter and connect it again.
If your high beam is not working as soon as you turn it on, this means that your battery is not supplying enough power for the lights. You may need to change the battery. If there is flickering on one side, you can interchange the module box and check if there is a problem with the module box.
If the lights continue to flicker, you may need an anti-flicker harness. If it came with your packing, you could attach the same while installation. The anti-flicker harness is meant to ensure that the connection to the JEEP’s electrical system is proper.
When you see that the lights are working perfectly put the ring back securely. Install the grill back and take your JEEP for a night ride.
Relevant Resources: